TRV 2-2421M

DC/DC Medical Converter • • • I/O isolation 5000 VAC (reinforced) • Certification according to IEC/EN/ES 60601-1 3rd edition for 2xMOPP and IEC/EN/UL 62368-1 • • • • • • TRV 2M Series, 2 Watt Wide 1.5:1 input voltage range Operating temperature range -40 to +80 °C without derating Short circuit protection Regulated outputs Low leakage current < 2 μA Efficiency up to 84 % Operation up to 5000 m altitude 5-year product warranty ES 60601-1 IEC 60601-1 UL 62368-1 IEC 62368-1 The TRV 2M is a series of 2 Watt DC/DC converters in a compact SIP-9 package with reinforced isolation of 5000 VAC for medical and industrial applications. The series offers a 1.5:1 input voltage range with a nominal input ranging between 5 and 24 VDC. With a continuous short circuit protection and a low leakage current of less than 2 µA, this converter is especially suited to protect any connected interfaces or applied parts to patients. Featuring almost fully regulated outputs this series provides great level of regulation without affecting the cost efficiency. It is an ideal solution for applications where an unregulated DC/DC converter would not meet your regulation requirements but cost still is a critical factor. With an operating temperature range from -40 to +80°C without derating and certifications acc. IEC/EN/ES 60601-1 3rd ed. for 2xMOPP and IEC/EN/UL 62368-1 this series is suitable for many different applications where a medical isolation system and short circuit protection is needed. Models Order Code Input Voltage Range TRV 2-0510M TRV 2-0511M TRV 2-0512M TRV 2-0513M TRV 2-0521M TRV 2-0522M TRV 2-0523M TRV 2-1210M TRV 2-1211M TRV 2-1212M TRV 2-1213M TRV 2-1221M TRV 2-1222M TRV 2-1223M TRV 2-1510M TRV 2-1511M TRV 2-1512M TRV 2-1513M TRV 2-1521M TRV 2-1522M TRV 2-1523M TRV 2-2410M TRV 2-2411M TRV 2-2412M TRV 2-2413M TRV 2-2421M TRV 2-2422M TRV 2-2423M Note 4.5 - 7 VDC (5 VDC nom.) 9.6 - 14.4 VDC (12 VDC nom.) 12 - 18 VDC (15 VDC nom.) 19.2 - 28.8 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC +5 VDC +12 VDC +15 VDC 600 mA 400 mA 167 mA 134 mA 200 mA 83 mA 67 mA 600 mA 400 mA 167 mA 134 mA 200 mA 83 mA 67 mA 600 mA 400 mA 167 mA 134 mA 200 mA 83 mA 67 mA 600 mA 400 mA 167 mA 134 mA 200 mA 83 mA 67 mA Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA –5 VDC –12 VDC –15 VDC 200 mA 83 mA 67 mA typ. 78 % 81 % 83 % 83 % 82 % 83 % 81 % 79 % 81 % 84 % 83 % 81 % 83 % 82 % 79 % 81 % 84 % 83 % 81 % 83 % 80 % 78 % 80 % 82 % 82 % 81 % 81 % 80 % - If the input will be switched electromechanically, use an external 47 μF/63 V E/C. to reduce voltage transient. www.tracopower.com September 20, 2023 Page 1 / 5 TRV 2M Series, 2 Watt Input Specifications Input Current 5 Vin models: 5 mA typ. (3.3 Vout model) 5 mA typ. (5 Vout model) 20 mA typ. (12 Vout model) 20 mA typ. (15 Vout model) 5 mA typ. (5 / -5 Vout model) 20 mA typ. (12 / -12 Vout model) 25 mA typ. (15 / -15 Vout model) 12 Vin models: 4 mA typ. (3.3 Vout model) 4 mA typ. (5 Vout model) 10 mA typ. (12 Vout model) 10 mA typ. (15 Vout model) 4 mA typ. (5 / -5 Vout model) 10 mA typ. (12 / -12 Vout model) 10 mA typ. (15 / -15 Vout model) 15 Vin models: 4 mA typ. (3.3 Vout model) 4 mA typ. (5 Vout model) 8 mA typ. (12 Vout model) 8 mA typ. (15 Vout model) 4 mA typ. (5 / -5 Vout model) 8 mA typ. (12 / -12 Vout model) 8 mA typ. (15 / -15 Vout model) 24 Vin models: 3 mA typ. (3.3 Vout model) 3 mA typ. (5 Vout model) 6 mA typ. (12 Vout model) 6 mA typ. (15 Vout model) 3 mA typ. (5 / -5 Vout model) 6 mA typ. (12 / -12 Vout model) 6 mA typ. (15 / -15 Vout model) 5 Vin models: 510 mA typ. 12 Vin models: 210 mA typ. 15 Vin models: 170 mA typ. 24 Vin models: 105 mA typ. 5 Vin models: 15 VDC max. (1 s max.) 12 Vin models: 25 VDC max. (1 s max.) 15 Vin models: 25 VDC max. (1 s max.) 24 Vin models: 35 VDC max. (1 s max.) 5 Vin models: 1'000 mA (slow blow) 12 Vin models: 500 mA (slow blow) 15 Vin models: 500 mA (slow blow) 24 Vin models: 315 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor - At no load - At full load Surge Voltage Recommended Input Fuse Input Filter Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation - Voltage Balance (symmetrical load) - Cross Regulation (25% / 100% asym. load) single output models: dual output models: See application note: dual output models: ±3% max. (60% load: 3.3, 5, ±5 Vout models) ±3% max. (90% load: other models) 2% max. 2% max. www.tracopower.com/overview/trv2m 4% max. dual output models: 4% max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 TRV 2M Series, 2 Watt Ripple and Noise (20 MHz Bandwidth) - single output 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Capacitive Load - single output - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection 100 mVp-p typ. 100 mVp-p typ. 125 mVp-p typ. 125 mVp-p typ. 100 / 100 mVp-p typ. 125 / 125 mVp-p typ. 125 / 125 mVp-p typ. 2'000 µF max. 820 µF max. 470 µF max. 470 µF max. 470 / 470 µF max. 220 / 220 µF max. 220 / 220 µF max. Not required ±0.03 %/K max. 20 ms max. Continuous, Automatic recovery Safety Specifications Safety Standards EN 62368-1 IEC 62368-1 UL 62368-1 EN 60601-1 IEC 60601-1 ANSI/AAMI ES 60601-1 2 x MOPP (Means Of Patient Protection) www.tracopower.com/overview/trv2m PD 2 Not mains connected - IT / Multimedia Equipment - Medical Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge External filter proposal: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 60601-1-2 edition 4 (Medical Devices) EN 55011 class A (with external filter) EN 55011 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55011 class A (with external filter) EN 55011 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/trv2m EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 60601-1-2 edition 4 (Medical Devices) EN 61000-4-2, ±15 kV, perf. criteria A EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A www.tracopower.com/overview/trv2m EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity 95% max. (non condensing) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TRV 2M Series, 2 Watt Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Creepage Clearance Isolation Resistance Isolation Capacitance - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 1 s - Input to Output - Input to Output - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V Leakage Current Reliability Washing Process - Touch Current - Calculated MTBF Environment - Vibration - Mechanical Shock - Thermal Shock Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number –40°C to +95°C +105°C max. –55°C to +125°C Depending on model See application note: www.tracopower.com/overview/trv2m Natural convection (20 LFM) 5'000 m max. 180 - 360 kHz (PFM) Reinforced Insulation 250 VAC 5'000 VAC 7'000 VDC 8 mm min. 8 mm min. 10'000 MΩ min. 10 pF typ. 20 pF max. 2 µA max. (240 VAC, 60 Hz) 10'410'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf MIL-STD-810F 7.6 g, 3 axis, 60 min, 20-2000 Hz MIL-STD-810F 50 g, 3 axis, 11 ms MIL-STD-810F -55°C to +125°C, 72 cycles, 30 min each Non-conductive Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Tinned Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) SIP9 Lead-Free Wave Soldering 260°C / 6 s max. 4.8 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 2dda669e-cfb2-4463-b721-ad8acc4e0fbd Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/trv2m All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TRV 2M Series, 2 Watt Outline Dimensions 19.6 Pinout 2.0 1 +Vin +Vin 2 in in 7 out out 8 No pin Common 9 +Vout +Vout 2.0 (0.07) 9.9 1.8 (0.63) Bottom view (0.02x0.01) Dual (0.079) (0.079) 16.0 0.5x0.25 Single (0.39) 10.0 (0.394) Pin 9 4.1 2.0 (0.079) 8 (0.16) 7 2.3 2 (0.09) 1 (0.49) 12.5 (0.77) Dimensions in mm (inch) Tolerances: x.x ±0.5 (±0.02) x.xx ±0.25 (±0.01) Pin diameter ±0.1 (±0.004) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5